How to turn on an automatic sprinkler system for Spring? - sprinkler system pup of valve
I closed on a house this week and the backyard is an irrigation system installed ... I wonder if there's anything I need to know before switching to the spring? Should I careful opening the faucet itself?
Sprinkler System Pup Of Valve How To Turn On An Automatic Sprinkler System For Spring?
1 comments:
If you have an automatic irrigation system with a timer that is 1) Read the manual to know how to define timers to the process (if you try do not have the manual, the online companies to find) 2) Replacing the battery ensure that it is good, 3) the date and time properly to ensure 4) that are the beginning and the end, what you want for each zone (not on water) in or under irrigation.
With respect to plumbing would I 1) Make sure you attached to anti-siphon valve (keeping the water in irrigation, drinking water), 2) Turn off the supply valve of the water easily small leaks (repair if necessary), 3 must be checked) to ensure that the heads are not blocked or missing, clean (or replace if necessary) 4) Make sure that sprinklers for areas that want to cover is the model (correct, and the spraying distance neither too long nor too short).
After these, I will ensure that the timer really turn valves and water (so that) they replace if necessary.
Once everything works Right, keep in mind, this may indicate that the timer and the valves work (no water at all or certain regions), the sprinklers are not clogged or damaged (not a point near the water) does not leak underground Train (water flows through the ground, where the system is switched on), the spray pattern is correct (no points, not receiving, water), and the beginning and end are perfect (irrigation, at the time) does not over or under irrigation.
That's all I can remember. Good luck!
Post a Comment